Vacuum Enlargement Overview for Penis Enlargement

Vacuum expansion to enlarge the penis

The purpose of the extenders is to make the most comfortable stretching of the penis. The mechanism works only if the head is securely fastened. The lifespan of the device depends on how safe and comfortable the bracket is and, consequently, the speed of progress. The best option is considered to be vacuum extensions, as well as their improved version - vacuum-adhesive. These devices appeared on the market about 10 years ago and have since changed significantly from mechanical.

Design features and principle of operation

In a vacuum extender, the head of the penis is not fixed with a loop or strap, but is vacuum-absorbed in a special cup (camera, vacuum nozzle). The device works on the principle of a vacuum pump, but in this case the effect is only on the head and its surrounding area. Air from the chamber, like from a pump, is pumped out by means of a pump or a pear.

The main advantages of models with vacuum fixation:

  • Do not slip;
  • Effective correction of male body curvature;
  • Do not hold your head and tremble;
  • Suitable for micropenis;
  • Comfortable to wear.

The main disadvantage of vacuum-mounted expansion is the appearance of bubbles on top. It does not happen mechanically. Damage is caused by the breakdown of tissues under the influence of vacuum. It is impossible to continue lessons until the blisters have healed, and because they occur regularly, the carrying efficiency of the device drops significantly.

Many manufacturers supplement their product with protective caps to protect themselves. Some models come with patch rollers that must be sealed before being placed in the cap. The procedure of adhesion and subsequent removal causes discomfort and pain.

Some men complain about the awkwardness of wearing such extenders: the protector is not fixed on a relaxed head, it is necessary to bring the penis to a state of at least partial erection. When wearing an extender, the head shrinks, resulting in a gap between it and the walls of the cap - the skin is still exposed to the traumatic effects of the vacuum.

Vacuum expansion installation scheme:

  1. Close your head, put on a protective cap.
  2. Partially expand the silicone cover attached to the top of the camera to its body.
  3. Place the penis in the chamber, flattening the silicone cover to the end along the shaft.
  4. Exhale excess air with a pencil or pump.
  5. Fix the penis to the extension rods, adjusting the length.

The part of the penis is tightly compressed with silicone, which causes discomfort and disrupts blood circulation. The closed area of the trunk is almost not open. If the penis is about 12 cm, then most of it will be under the silicone stretch.

In advanced models with vacuum-adhesive type attachments, only the head is absorbed into the chamber, while the sleeve is replaced by soft shells. The penis and membrane are pre-lubricated with a special lubricant, then the head is brought to the opening of the chamber and absorbed into it with a few movements of a rubber bulb. After it is disconnected, the device is securely attached to the top. To remove it, simply turn the valve at the top of the chamber. The lubricant adheres to the membrane, preventing the formation of imperfections, which eliminates the appearance of bubbles.

How can I use it

Before the first adjustment of the vacuum extender, the initial length is determined - the size of the erect penis. In the future, the compression force is regulated by springs on the rods (spring-loaded models): if the scales are fully visible (the pieces are not closed), then there is no tension. If there is no noticeable tension with the ends loosened completely, then the extra length is increased by using the rods included in the kit. The traction force of the stretcher (belt system) can be determined using household spring scales.

It is impossible to immediately set a high degree of tension: it is possible to compress the covered albumin on the cavernous bodies, worsening the erection, swelling of the head, lack of growth and even reduction of the length of the penis. A light adaptive load is given for one month. Extender is worn for no more than 1-2 hours with a tension force of 200-400 g, maximum 500 g. When the tissues of the penis become accustomed to stretching, you should switch to a more serious mode: 6-8 hours. Per day (not necessarily continuously) with a load of 1, 1 kg. The maximum length of the extender (traction force) can be worn for only 4 weeks.

Energy Growth Program:

  • Spread the extender to the length of the erect penis, stretch 300-600 g;
  • The load on the dressing can be increased up to 1 kg;
  • Wear for 2 hours a day without a break or spend 2 sessions for 1, 5 hours. One day off per week is required.

It is important to measure the length of the penis after each exercise (stretched, unadjusted). An increase indicates the effectiveness of the chosen program. If the penis shrinks, then it is necessary to rest for 2-3 days.

Through one year of vacuum expansion it is possible to increase the length of the penis by 3-4 cm and the circumference by 1 cm. Growth occurs faster in young people than in adult men, due to their height. Tissue elasticity. The result also largely depends on the density of the protein coating.

Contraindications

You should consult your doctor before purchasing a vacuum extension - it will help you determine if there are any contraindications to wearing it. Key includes the following:

  1. Blood coagulation disorders, fragile vessels. A vacuum will provoke the appearance of hematomas.
  2. Prostate adenoma, prostatitis.
  3. Scrotal hernia.
  4. Sexually transmitted infections.

It is dangerous to use vacuum expanders under the influence of painkillers, drugs or alcohol. It is undesirable to put the device on at night - in a dream it is easy to miss the moment of onset of oxygen starvation of tissues due to excessive compression, as well as dangerous spontaneous erections at night.

Overview of popular models

Most urologists and andrologists recommend a vacuum system with vacuum-adhesive fixation to enlarge the penis. The soft membrane protects itself from damage to prevent direct impact of the vacuum. The vacuum-adhesive model is also considered comfortable and efficient. The set includes a camera, pear, rods, a set of membranes of different sizes, expansion rods, gel. There are detailed instructions on how to properly put on and carry the device. The maximum length of the extender is 32 cm.

There is a kit for upgrading the strap and loop extenders. However, its cost is so high that it is easier to buy a vacuum expansion.

A complete set of vacuum enlargements for penis enlargement

The Korean Extender is positioned by the manufacturer as the most comfortable to wear, with an additional head enlargement function. Attached by vacuum-adhesive method. The set includes 3 membranes, 8 screw expansion pins.

Method of use:

  1. A membrane of suitable diameter is stretched over the edges of the chamber, lubricated with lubricant (along with the head of the penis);
  2. The camera is mounted on rods;
  3. The shaft of the penis is placed in the extender, the head is threaded into the chamber;
  4. The pear pumps out the air.

The Swiss company device is a vacuum expansion designed for long-term carrying. According to men, he is the most comfortable to be recognized. The set includes 3 vacuum chambers with condoms attached to them, 4 cuffs, 2 protective caps, pump. The model includes a belt fixing system (stringer) that allows the extender to be used in public places.

ᲘInstruction for use:

  • A protective hat is worn on the head.
  • The penis threads are between the expanding rods, the rods being dug until the optimal degree of tension is reached.
  • The head is placed in a camera of suitable size (attached to the sizing template), a condom is wrapped around the body.
  • The pump is attached to the chamber in the form of an accordion, with its help it pumps air.

If necessary, the rods are removed, and a member with a camera on top is fastened to the belt.

Some make handmade extensions using bicycle pump, plastic, silicone, and plumbing fittings. It is very difficult to make a really functional and safe device with your own hands. In terms of quality, such handicrafts usually fall short of cheap Chinese extensions.

Reviews

Man, 44 years old: "I have been using the device with a belt stretcher for half a year now. The increase in length was 2 cm - a significant result. Lying I add jelq and hanging weights, but rarely.

Man, 25 years old: "I ordered a Chinese device and I think I will return or exchange it for Korean before it is too late. It is uncomfortable to wear, the penis is stretched to colic, in such conditions one can not talk about any effectiveness.

Conclusion

Swiss, Korean and German-made vacuum enlargements are officially recognized as an effective means of penis enlargement. Equipped with detailed video instructions to rule out abuse. It is important to note that the regularity of the extender bearing is as important a condition for success as its quality.